I-View ANYCAM DM-2MIPA 04 Series Manual page 68


System Update: Click this button to update the newest Firmware. You can visit
www.i-view.com.tw
 File: Click " Browse" icon to select the new Firmware file. Please save the Firmware at the C:\ or
E:\ path directory to avoid the update failed.
 Upadte: Click this icon yo update the Firmware, after select the correct Firmware file.

Auto Reboot: Click this button to setup the reboot schedule. As this process can avoid to reduce the
IP camera failed and renew IP camera to get better performance.
 Maintenance Mode: Click and drop menu from this section to choose the schedule (Disable, Very
Day, Evert Week, Once ) for reboot.
 Save: Click "Save" icon to store the setting.

Storage Management: Click this button to check the current SD card status, such as Capacity
(MB)/ Free Spare (MB)/ Status or format SD card. As shown in the follow figure:
Note: This section will disappear when the IP camera does not plug the SD card.
to find put the newest Firmware when needed.
68