I-View ANYCAM DM-2MIPA 04 Series Manual page 37

Control Panel function description
Voice intercom: Click this button to enable 2-Way audio communicate between the PC and IP
camera. Click the icon again that the 2-way audio function will be turned off. IP camera must install the
2Vp-p level or above Microphone and Speaker (built-in amplifier). The audio setup of IP camera can
refer to the " Audio setup chapter ".
Capture: Click this button, to snap the current image and save it as JPG format automatically.
The default save path is C:\Program Files\PREVIEW, and the storage path is changeable.
Full Screen: Press button or double right click Mouse to enable full screen image. Press the
"Esc" key or double right click Mouse again will restore the display screen.
Record: Click this icon and the icon become to blue (Recording On), click this icon again the
icon will become to black (Recording Off). The recording video clips with the AVI format.
For Motorized Lens model only.
Press "+" for Zoom in, Focus near and enlarge IRIS.
Press "-" for Zoom out, Focus far and smaller IRIS.
Press "+" to increase the valueof "Brightness /Contract ".
Press "-" to decrease the valueof "Brightness /Contract "
Click become to default setting.
37