I-View ANYCAM DM-2MIPA 04 Series Manual page 67


Exception Settings: Click this button to setup the alarm output trigger of exception event.
 Exception Type: There are Network Discounted/ IP Address Conflict/ Illegal Access/ HDD
Full/HDD (SD) Error, there are 5 exception types.
 Alarm Output: Entry the value alarm output trigger period. The alarm output will keep on
sending the signal of each trigger.
 Save: Click "Save" icon to store the setting.

User Management: Click this button to Add new user ot Modify/Delete existing user.
 Add User: Click this icon to add a new user. Entry the user name/Password and confirm password
again, then click " Save " icon to complete the setting.
 Modify: Click this icon from existing user section to modify user name and password
 Del: Click this icon from existing user section to delete the user.
 Permission: Click this icon from existing user section to modify the privilege of existing user. You
can setup individual right for each user.
 Save: Click "Save" icon to store the setting and log out at the same time.
 Return: Click "Return" icon to quit the setup and log out at the same time.
67