I-View ANYCAM DM-2MIPA 04 Series Manual page 50

2/4/5-mega iva network camera
Table of Contents

Advertisement

 Object Left/Lost: Click this button to setup object left and object lost detection function.
 Enable: Enable or disable the object left and object lost detection function.
 Arming Schedule: Arm schedule of enable object left and object lost detection. Check/Uncheck
from Monday to Sunday, each date can has its own trigger period.
 Area Setting: Click " Drawing " icon, then press and drag the left Mouse button to setup the
detection region from Area Setting section. Click the right button to complete the detection region
setting
 Clear: Click Clear to delete all detection regions
 Detection Area: To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
 Detection Type: There are "Object lost", "Object left" and "Object Left/Lost" modes, and choose
one for the detection type.
 Target Percent: Setup the minimum percentage ration (target size/ image area) of effective counting
targets. Once the targets ration is smaller than the setting value, the system will ignore the target
which passing through the trigger line.
 Time: Set the upper limit value for the object left or disappear period, the alarm will be triggered
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Anycam dm-4mipa 04 seriesAnycam dm-5mipa04 series

Table of Contents