I-View ANYCAM DM-2MIPA 04 Series Manual page 52

 Clear: Click Clear to delete all detection regions
 Detection Area: To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
 Detection Type: There are "Target Entry", "Target Lave", " Target Enter/Leave" and "Target Loiter"
modes, and choose one for the detection type.
 Object Percent: Setup the minimum percentage ration (target size/ image area) of effective
counting targets. Once the targets ration is smaller than the setting value, the system will ignore the
target which passing through the trigger line.
 Time: Set the upper limit value for the Target leave or enter or stay period, the alarm will be
triggered automatically when the value is more than the setting.
 Email: Check "Email" and once the event triggers that it will send Email to setting email address.
 Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
 PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
 Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
 Save: Click "Save" icon to store the setting.
52