The Function Description Of Setup Window - I-View ANYCAM DM-2MIPA 04 Series Manual

4-4. The Function Description of Setup Window

Click " Setup " icon to start setup the parameters of IP camera. You can configure basic IP camera
settings like data transfer protocol and data storage folder...etc.

Device Information:
Information: Click this button to check the current Mac number, Firmware version, model, and also
allow you entry the camera name on the "Device name:" tab.
 Device Name: Edit the camera name or location, then the test will show on the right top of frame.
 Device Type: Display the device type.
 Serial No. : Display the IP camera serial No.
 Firmware version: Display the current Firmware version of IP camera.
 Hardware version: Display the current Hardware version of IP camera.
 Save: Click Save to change the setting.

QR Code (Oprion): Click this button will show the QR code for the download path of Mobile
phone and Table PC App . As for the QR code of Device ID that for the peer to peer connection via
App. The App can suit for the Android, iPhone Mobile phone and i-Pad Table PC. Scan QR code
into your mobile App, then you can remote viewing /Recording the IP camera video and also can
control the PTZ IP camera.
39