I-View ANYCAM DM-2MIPA 04 Series Manual page 46

1. Check "Enable" and select the value of sensitivity. The high value will get more sensitivity.
2. Setup the date from drop of week section (Default whole week), and select the time period. You
can select multi period per day. Repeat the above process to setup another date.
3. Select motion detection area from "Area setting" section. Click " Drawing " icon, then press and
drag the left button of Mouse to setup the detection areas. You can setup multi region area number
for each camera. Click "Clear" bottom to clear the current detective areas.
4. Specify the notify method (Such as Trigger alarm output, move PTZ camera position, notify via
email) when an event occur.
5. Click Save icon to change the setting.
 Video Tempering: Click this button to setup Video Tempering function.
Following the steps as below to setup the Video Tempering function..
1. Check "Enable" and select the value of sensitivity. The high value will get more sensitivity.
2. Setup the date from drop of week section (Default whole week), and select the time period. You
can select multi period per day. Repeat the above process to setup another date.
3. Select motion detection area from "Area setting" section. Click " Drawing " icon, then press and
drag the left button of Mouse to setup the detection areas. You can setup multi region area number
46