I-View ANYCAM DM-2MIPA 04 Series Manual page 47

for each camera. Click "Clear" bottom to clear the current detective areas.
4. Specify the notify method (Such as Trigger alarm output, move PTZ camera position, notify via
email) when an event occur.
5. Click Save icon to store the setting.
 Privacy Mask: Click this button to setup Privacy mack function.
Following the steps as below to setup the Privacy mask function..
1. Check "Enable" and then press and drag the left button of Mouse to setup the detection areas which
you want paste the mask on the image.
2. Repeat the step 1 process to make another mask on the video. (Maximum 4 mask areas)
3. Click Save icon to store the setting.
47