Enable: Check " Handle" icon to enable the alarm input function.
Alarm input: This IP camera support 2 alarm input ports. Select the alarm input port.
Alarm in name: You can define the alarm input name or location.
Trigger: Setup the alarm input mode (Normal Close / Normal Open) of trigger single.
Arming Schedule: Arm schedule of enable alarm input detection. Check/Uncheck from Monday
to Sunday, each date can has its own trigger period..
Email: Check "Email" and once the event triggers that it will send Email to setting email address.
Alarm Output: Check "Alarm output" and once the event triggers, the camera will linkage to alarm
output.
PTZ: Check "PTZ" and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset: Setup the Preset point for the PTZ camera move to when the event is triggered.
Save: Click "Save" icon to store the setting.
Alarm Output: Click this button to setup the alarm output parameters when the event is triggered.
Output Replay Status: Setup the alarm output mode (Normal Close / Normal Open).
Output Delay: Entry the value alarm output trigger period. The alarm output will keep on sending
the signal of each trigger.
Save: Click "Save" icon to store the setting.
66