Installation Method - I-View FDMO-2MIPA-33XIR Quick Manual

 Installation Method
The IR speed dome could be installed in wall-mount and pedant-mount
 Wall-mount Installation Procedures:
1) Take out the Junction Box from the package (as shown), mark the installation hole positions on the
wall referencing to the bottom of bracket.
2) Drill the hole and install 4 pieces of M8 expansion bolt into the hole.
The wall and ceiling must be thick enough to install the expansion bolts and can bear 4 times the weight
of the dome camera itself.
3) Take out the IR speed dome and put the cables through the bracket.
4) Use M5 screws to fix the bracket and dome body.
5) Use 4 pieces of M8 screw nuts with washer to fix the junction box on the wall.
 Pendant-mount Installation Procedures:
1) Take out the bracket from the package (as shown), mark the installation hole positions on the ceiling
referencing to the bottom of bracket.
4