I-View ANYCAM DM-2MIPA 04 Series Manual page 48

 Target Count: Click this button to setup Target count function.
 Enable: Enable or disable the target counting function.
 Arming Schedule: Arm schedule of enable Target count. Check/Uncheck from Monday to Sunday,
each date can has its own trigger period.
 Area Setting: Click " Drawing " icon, then press and drag the left Mouse button to setup the trigger
line from Area Setting. You can press and drag Mouse from top to down (A point at left side) or
down to top (b point at left side). Click the right button to complete the setting, and the targets
passing through the line will be counted.
 Clear: Click Clear to delete all the test lines
 Trigger Line: To add new trigger lines (Max. 4 lines) and each line can setup individual
corresponding parameters.
 Statistics: There are A→B and B→A 2 statistical modes, and choose the" Increase count " or
" Decrease count" or " Ignore " mode for each trigger line.
 Flow Counter: Enable or disable the Flow Counter function
48