I-View ANYCAM DM-2MIPA 04 Series Manual page 40


PTZ Setting: Click this button to setup the PTZ setting parameters.

Time Setting: Click this button to setup the time clock, NTP and DST time zone.
Time setting:
 Click the Device time section to adjust the Date/Time, then click the "Timing" to finish the time
clock adjustment. Click "PC" icon, then the IP camera will synchronize time with PC.
 Time Zone: Configuring Time Synchronization Manually. When the IP Camera is taken to another
time zone, you can use the Time Zone function to adjust the time. The time will be adjusted
according to the original time and the time difference between the two time zones. From the Time
Zone drop-down menu to select the Time Zone in which the speed dome locate
 GMT: Adjust the time to make it more exactly.
NTP Setting:
 Server Address: Entry the IP address of NTP server.
 NTP Port: Entry the port number of NTP server. The default port number is 123.
 Interval: Entry the interval period and the IP camera will synchronize the time with NTP server
base on the setting period.
If the IP Camera is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address: 210.72.145.44).
If the IP Camera is set in a customized network, NTP software can be used to establish a NTP server
for time synchronization.
NTP Setting:
40