I-View ANYCAM DM-2MIPA 04 Series Manual page 45

Off: Select the Off mode; the IR LED will be turned off.
 Save : Click the Save icon to setup the parameters.
 ROI Setting : ROI (Region of Interest) encoding is used to enhance the quality of images which are
specified in advance. These ROI areas image will first priority to send out for internet transmission
when bandwidth is not enough.
1. Select the Area number, then check " Enable" icon.
2. Press the left button and drop the mouse to select where want to setup the ROI area.
 Choose the number from Level section. The level higher will get clearer image of ROI.
 Click Save icon to set up the setting.
 Motion Detection: Click this button to setup motion detection function.
Following the steps as below to setup the motion detection function..
Follow up the process as below to setup the ROI area.
45