Kyocera Mita KM-2560 Service Manual page 71

Maintenance
item No.
Checking scanner operation
U073
Description
Simulates the scanner operation under arbitrary conditions.
Purpose
To check scanner operation.
Start
1. Press the start key.
2. Select the item to be operated.
Display
SCANNER MOTOR
HOME POSITION
DP READING
DUST CHECK
Setting: SCANNER MOTOR
1. Select [SCANNER MOTOR].
2. Select the item.
3. Change the setting using the +/- keys.
Display
ZOOM
SIZE
LAMP
Original sizes for each setting in SIZE
Setting
5000
4300
5100
10000
8600
7100
6100
4. Press the start key. Scanning starts under the selected conditions.
5. To stop operation, press the stop key.
Method: HOME POSITION
1. Select [HOME POSITION].
2. Press the start key.
The mirror frame of the scanner moves to the home position.
Method: DP READING
1. Select [DP READING].
2. Press the start key.
The mirror frame of the scanner moves to the reading position.
Method: DUST CHECK
1. Select [DUST CHECK].
2. Press the start key. The exposure lamp lights.
3. To turn the exposure lamp off, press the stop key.
Completion
Press the stop key when scanning stops. The screen for selecting a maintenance item No. is displayed.
Description
Description
Scanner operation
Home position operation
DP scanning position operation
Dust adhesion check operation with lamp on
Operating conditions
Magnification
Original size
On and off of the exposure lamp
Paper size Setting
A4 5000
B5 7800
11" x 8 " 10200
1/2
A3 9000
B4 8400
A4R 6600
B5R 5100
2H0/2HZ
Setting range
25 to 400 %
See below.
0 (off) or 1 (on)
Paper size
A5R
Folio
11" x 17"
11" x 15"
8 " x 14"
1/2
8 " x 11"
1/2
5 " x 8 "
1/2 1/2
1-3-35