Kyocera Mita KM-2560 Service Manual page 58

2H0/2HZ
Maintenance
item No.
Adjustment: Trailing edge registration adjustment
U034
1. Select [END].
Display
END
2. Press the system menu key.
3. Press the start key to output a test pattern.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, decrease the value. For output example 2, increase the value.
6. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Setting the printing area for folio paper
U035
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
Display
LENGTH DATA
WIDTH DATA
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-22
Description
Description
Trailing edge registration adjustment
Correct image
example 1
Figure 1-3-6
Setting
Length
Width
Setting Initial
range setting
-40 to 100 0
Output Output
example 2
Setting range
330 to 356 mm
200 to 220 mm
Change in
value per step
1 ms
Initial setting
330
210