Kyocera Mita KM-2560 Service Manual page 138

2H0/2HZ
Section Description
Duplex 60
section Duplex paper convey-
ing section 1
61
Duplex paper convey-
ing section 2
Optional 70
DP No original feed
71
An original jam in the
original conveying sec-
tion 1
72
An original jam in the
original conveying sec-
tion 2
73
An original jam in the
original switchback
section
74
An original jam in the
original switchback/
feed section
75
An original jam in the
original switchback/
conveying section
78
Document processor
cover open
Optional 80
finisher Finisher timeout jam
(built-in finisher only)
1-4-6
Conditions
The duplex paper conveying switch (DUPPCSW) does
not turn on within specified time of the feedshift switch
(FSSW) turning on.
The duplex paper conveying switch (DUPPCSW) does
not turn off within specified time of the feedshift switch
(FSSW) turning off.
The registration switch (RSW) does not turn on within
specified time of the duplex paper conveying switch
(DUPPCSW) turning on.
The registration switch (RSW) does not turn off within
specified time of the duplex paper conveying switch
(DUPPCSW) turning off.
The DP timing switch (DPTSW) does not turn on within
specified time during the first sheet feeding (Retry 5
times).
The DP timing switch (DPTSW) does not turn on within
specified time during the second sheet feeding (Retry 5
times).
DP timing switch (DPTSW) does not turn off within speci-
fied time of the original conveying motor (OCM) turning
on.
DP timing switch (DPTSW) turns off within the specified
time of period of the original conveying motor (OCM)
turning on.
During original switchback operation, DP timing switch
(DPTSW) does not turn off within specified time of the
original conveying motor (OCM) turning on.
DP timing switch (DPTSW) does not turn on within speci-
fied time of the original switchback motor (OSBM) turning
on.
The original switchback switch (OSBSW) does not turn
on within specified time of the DP timing switch (DPTSW)
turning off.
The document processor or document processor top
cover is opened during original feeding.
DP timing switch (DPTSW) or original switchback switch
(OSBSW) turns on when starting the original paper feed.
Paper ejection is not output from the machine to the doc-
ument finisher within specified time of the paper convey-
ing switch (PCSW) turning on.
Specified time
2621 ms
2629 ms
1636 ms
1493 ms
1468 pulses
1468 pulses
9900 pulses
30558 pulses for
large sizes
1145 pulses
9900 pulses
30558 pulses for
large sizes
2300 pulses
1815 pulses
-
15 s