System Menu
AppleTalk Setup
6-58
3
Press [On].
4
Press the key for the frame type you want to use.
5
Press [OK].
6
Press the Power key and confirm that the Power key/indicator and the
memory indicator are off. After that, turn the main power switch off and on.
Select the Apple Talk network connection.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of AppleTalk.
3
Press [On].
4
Press [OK].
5
Press the Power key and confirm that the Power key/indicator and the
memory indicator are off. After that, turn the main power switch off and on.
System - NetWare
Use NetWare.
Frame Type
Off
Auto
On
802.3
IP Address
SNAP
Status
System - AppleTalk
Use AppleTalk.
*Please set TCP/IP to [On].
Off
On
Status
ADVANCED OPERATION GUIDE
Ether-II
802.2
Cancel
OK
10/10/2007
10 :10
Cancel
OK
10/10/2007
10 :10