Table of Contents
Advertisement
Management
Counting the Number of Pages Printed
7-18
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached
the limit of restriction. The table below describes the action taken.
Item
Immediately *
Subsequently
Alert Only
*
The next job will be prohibited in sending or in storing in the box.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
4
Press [Next] of Job Accounting Setting, [Next] of Default Setting and then
[Change] of Apply Limit.
5
Select
[Immediately],
[Subsequently], or
[Alert Only].
6
Press [OK].
This counts the number of pages printed. Counts are classified into Total
Job Accounting and Each Job Accounting. A new count can also be started
after resetting the count data which was stored for a certain period of time.
Description
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the
subsequent job will be rejected.
Job continues while displaying an alert message.
"
"
3060
.
User Login/Job Accounting - Apply Limit
Select what to do when the counter goes over its limit .
Immediately
Subsequently
Status
ADVANCED OPERATION GUIDE
Alert Only
Cancel
OK
10/10/2007
10 :10
Advertisement
Table of Contents
