Kyocera 1102H03NL0 Advanced Operation Manual page 200

System Menu
6-30
3
Use the [+] or [-] to
enter the margin
widths for L/R and T/
B(-0.75 - +0.75).
You can use the
number keypad to
enter the number
directly.
4 Press [OK].
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available
settings.
Item
Collate Off
On
Offset Off
Each Set
(Each Page)
NOTE:
Refer to page 1-13 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2 Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Collate/Offset.
3
Select the defaults
for Collate and
Offset respectively.
4
Press [OK].
Common Settings - Margin Default
Select the default margin width.
Use [-]/[+] or the numeric keys to enter a number.
L/R(-0.75 - +0.75)
"
0.23
# Keys
Status Paper is remaining in Document Processor .
Description
Collate not performed.
Collate performed.
Offset not performed.
Offset performed. (If [Off]) is selected of
Collate, it is performed [Each Page].)
Common Settings - Collate/Offset
Select the default collate/offset setting .
Collate
Off
Offset Off
Status
ADVANCED OPERATION GUIDE
T/B(-0.75 - +0.75)
"
0.47
# Keys
Cancel OK
10/10/2007 10 :10
On
Each Set
Cancel OK
10/10/2007 10 :10