Kyocera 1102H03NL0 Advanced Operation Manual page 113

ADVANCED OPERATION GUIDE
Setting of Alternative Emulation
When you have selected [KPDL(Auto)] as emulation mode, you can switch
between KPDL and another emulation mode (alternative emulation)
automatically according to the data to print. The alternative emulation you
can set is [Line Printer], [IBM Proprinter], [DIABLO 630], [EPSON LQ-850],
[PCL6]* and [KC-GL] (*: Default setting).
Use the procedure below to select the alternative emulation.
1
Press the System Menu Key.
2 Press [Printer] > [Change] in Emulation > [KPDL(Auto)] > [Alt Emulation].
3 Select the desired
alternative
emulation.
4 Press [OK].
5
Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power off and on.
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set
whether or not the error report is output. The default setting is Off (not
output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] in Emulation > [KPDL] or [KPDL(Auto)] > [KPDL
Error Report].
Printer - Emulation
Set alternative emulation for KPDL (Kyocera Page Description Language ).
Line Printer IBM DIABLO 630
Proprinter
PCL6
Status
Printer
EPSON
LQ-850
KC-GL
Cancel OK
10/10/2007 10 :10
3-3
3