Table of Contents
Advertisement
System Menu
Auto Error Clear
6-76
If an error occurs during printing, the print job stops to wait for the next step
to be taken by the user. In the Auto Error Clear mode, automatically clear
the error after a set amount of time elapses.
The following errors are automatically cleared.
Print overrun
Memory is full
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of Auto Error Clear.
3
Press [Off] or [On].
4
Press [OK].
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors. Options are between 5 and 495 seconds
(every five seconds).
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not
appear.
Use the procedure below to set the automatic error clear delay.
1
Press the System Menu key.
Date/Timer - Auto Error Clear
If an error occurs, automatically clear it after
a set amount of time elapses .
Off
On
Status
ADVANCED OPERATION GUIDE
Cancel
OK
10/10/2007
10 :10
Advertisement
Table of Contents
