Table of Contents
Advertisement
Sending Functions
2-28
Individual Border Erase
Specify border erase widths individually for all edges.
In each option, the available ranges are as below.
Input units
Inch models
Metric models
Use the procedure below to erase borders when sending scanned
originals.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Advanced Setup] and then [Border Erase].
4
Press [Border Erase Sheet] to erase borders for an individual sheet or
[Border Erase Book] to erase borders for a book.
Use [+] or [-] to enter
the width in Border
or Gutter. Press [#
Keys] to use the
number keys for
entry.
Press [Individual Border Erase] to select the individual border erase.
Use [+] or [-] to enter the border width or press [# Keys] and enter the width
using the numeric keys.
Original
Border Erase Range
0 to 2" (in 0.01" increments)
0 mm to 50 mm (in 1-mm increments)
Ready to send.
Enter Destination.
Border Erase
Border
Off
Border Erase
Press [OK] to display
Sheet
the image.
Border Erase
Book
Gutter
Individual
Border Erase
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Copy
Destination
1
(0.00 - 2.00)
0.00
"
# Keys
(0.00 - 2.00)
"
0.00
# Keys
Cancel
OK
10/10/2007
10 :10
Advertisement
Table of Contents
