Table of Contents
Advertisement
System Menu
Output Tray
6-20
Select output tray respectively for copy jobs, print jobs from Custom Box,
computers, and FAX RX data. The options are as follows.
Output Tray
Top Tray
Finisher Tray*
Job Separator
*
Select [Face Up] (print surface up) or [Face Down] (print surface
down) for paper orientation at output.
NOTE:
Optional job separator, and document finisher are required.
FAX RX data output can be specified when the optional fax kit is installed.
Use the procedure below to select the output tray.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Output Tray.
3
Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE:
FAX Port 1 appears when the optional fax kit is installed. If you
have 2 optional fax kits installed, Fax Port 2 appears. You can specify the
output tray for the second kit (Dual FAX).
4
Select Output Tray.
For [Finisher Tray],
select [Face Up]
(print surface up) or
[Face Down] (print
surface down) for
paper orientation at
output.
5
Press [OK].
Descriptions
Delivery on Top Tray of the machine.
Delivery on Tray set to the optional
document finisher or built-in finisher.
Delivery on the optional job separator.
Common Settings - Copy /Custom Box
Select output tray for copy jobs.
Top Tray
Finisher Tray
Status
ADVANCED OPERATION GUIDE
Output Face
Face Up
Face Down
Cancel
OK
10/10/2007
10 :10
Advertisement
Table of Contents
