Kyocera 1102H03NL0 Advanced Operation Manual page 115

ADVANCED OPERATION GUIDE
Setting of page size and pen
When you have selected KC-GL as emulation mode, you can set the page
size, one of eight kinds of pens, and thickness of each pen.
The table below shows the available settings.
Setting item
Page Set B0, B1, B2, B3, A0, A1, A2, Special Size*
Pen Adjust Pen 1 to Pen 8
NOTE:
The default setting of thickness of pen is Pen 1:1 dot(s), Pen 2:2
dot(s), Pen 3:3 dot(s)...Pen 8:8 dot(s).
Use the procedure below to select the interface.
1 Press the System Menu Key.
2 Press [Printer] > [Change] in Emulation > [KC-GL] > [Page Set].
3
Select the print size.
NOTE:
[Special Size] is the size designated in Prescribe SPSZ
command. For details of Prescribe command, refer to the Prescribe
Command Reference Manual.
4
Press [OK]. The previous screen reappears.
5 Press [Pen Adjust] > [Change] for the pen for which you want to change
the thickness (1 to 8).
Set value
1 to 99 dot(s)
Printer - Page Set
Select print size for KC -GL .
B0 B1 B2
A1 A2 Special Size
Status
Printer
*: Default setting
B3 A0
Cancel OK
10/10/2007 10 :10
3-5
3