Kyocera 1102H03NL0 Advanced Operation Manual page 221

Duplex
Copies
ADVANCED OPERATION GUIDE
Select binding orientation for duplex mode. The table below shows the
available settings.
Item
1-sided No duplex mode
2-sided Bind Shorter edge
ShortEdge bound
2-sided Bind Longer edge
LongEdge bound
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3 Press [1-sided],
[2-sided Bind
LongEdge], or
[2-sided Bind
ShortEdge].
4 Press [OK].
Set the default number of copies, from 1 to 999.
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
Description
Printer - Duplex
Set the default duplex mode .
1-sided 2-sided
Bind LongEdge
Status
System Menu
Finish
2-sided
Bind ShortEdge
Cancel OK
10/10/2007 10 :10
6-51
6