Kyocera 1102H03NL0 Advanced Operation Manual page 224

System Menu
LF Action
CR Action
6-54
Set the line feed action when the machine receives the line feed code
(character code 0AH). The table below shows the available settings.
Item
LF Only
LF and CR
Ignore LF
Use the procedure below to select the interface.
1
Press the System Menu key.
2
Press [Printer], [ ] and [Change] of LF Action.
3 Press [LF Only], [LF
and CR] or [Ignore
LF].
4 Press [OK].
Set the character return action when the machine receives the character
return code (character code 0DH). The table below shows the available
settings.
Item
CR Only
LF and CR
Ignore CR
Use the procedure below to select the interface.
1
Press the System Menu key.
Description
Only line feed performed.
Line feed and character return performed.
No line feed performed.
Printer - LF Action
Set the line feed action.
LF Only LF and CR
Status
Description
Only character return performed.
Character return and line feed performed.
No character return performed.
ADVANCED OPERATION GUIDE
Ignore LF
Cancel OK
10/10/2007 10 :10