Kyocera 1102H03NL0 Advanced Operation Manual page 194

System Menu
6-24
Color mode
Monochrome
Use the procedure below to select the default color setting.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Function Defaults and then [Change]
of Color Selection.
3 Select the default
color setting.
4 Press [OK].
File Format
Select the default file type to send the scanned originals. The available
default settings are shown below.
File Format
TIFF
PDF
JPEG
High Comp. PDF*
* Only displayed when the optional PDF upgrade kit has been used.
NOTE:
Refer to page 2-14 for file formats.
Use the procedure below to select the default file format.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Function Defaults and then [Change]
of File Format.
Description
Scan document in black and white. File
size is smaller than Full Color or Grayscale.
Common Settings - Color Selection
Select default color.
Full Color Grayscale Monochrome
Status
Description
Send files in TIFF format.
Send files in PDF format.
Send files in JPEG format.
Send files in High Comp. PDF format (refer
to page 2-16).
ADVANCED OPERATION GUIDE
Cancel OK
10/10/2007 10 :10