Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
3
Select the desired
Duplex mode.
4
If you choose [1-sided>>2-sided], [2-sided>>2-sided] or [Book>>2-sided],
select the binding edge of the finished copies in Finishing.
5
If you choose [2-
sided>>2-sided], [2-
sided>>1-sided],
[Book>>1-sided] or
[Book>>2-sided],
select the binding
edge of the originals
in Original.
6
Press [Original Orientation] to select orientation of the originals, either [Top
Edge Top] or [Top Edge Left]. Then press [OK].
7
Press [OK].
8
Place the originals in the document processor or on the platen and press
the Start key.
If the originals are placed on the platen, consecutively replace each
original after pressing the Start key.
After scanning all originals, press [Scan finish] to start copying.
Ready to copy.
Duplex
1-sided
>>1-sided
1-sided
Press [ OK] to display
>>2-sided
the image.
2-sided
>>1-sided
2-sided
Finishing
>>2-sided
Book
>>1-sided
Binding
Book
Left/Right
>>2-sided
Add Shortcut
Status
Ready to copy.
Duplex
Original
1-sided
>>1-sided
1-sided
Press [ OK] to display
>>2-sided
Binding
Left/Right
the image.
2-sided
>>1-sided
2-sided
>>2-sided
Book
>>1-sided
Book
>>2-sided
Add Shortcut
Status
Copying Functions
Copies
1
1
Top Edge Top
Binding
Top
Original
Orientation
Cancel
OK
10/10/2007
10 :10
Copies
1
Binding
Top
Top Edge Top
Original
Orientation
Cancel
OK
10/10/2007
10 :10
1-35
Advertisement
Table of Contents
