Copying & Swapping Channel Settings - Yamaha 01V Owner's Manual

Copying & Swapping Channel Settings
The Channel Copy function is used to copy input channel settings from one channel to
another. The Channel swap function is used to swap input channel settings between
channels. Copy and Swap can be used with input channels 1 through 16.
1. Use the [VIEW] button to locate the VIEW page shown below.
2. Use the cursor buttons and PARAMETER wheel to select the SOURCE and
DESTINATION channels.
3. Use the cursor buttons and [ENTER] button to select a CATEGORY.
ALL —All input channel settings.
EQ —EQ settings.
DELAY —Delay settings.
DYNAMICS —Dynamics settings.
FADER —Fader settings.
4. Use the cursor buttons to select COPY or SWAP, and the [ENTER] button
to execute the function.
Copying & Swapping Channel Settings
59
01V—Owner's Manual