Table of Contents
Advertisement
Routing Input Channels
The Routing switches, available on input channels 1 through 24 (and the effects
returns), are used to route signals to the four bus outs, stereo out, and direct outs.
For Input Channels 1–16 & the Effects Returns
1. Use the [PAN/ROUTING] button to locate PAN/ROUT page 2, as shown
below.
2. Use the [SEL] buttons to select channels.
3. Use the cursor buttons to select the Routing switches and the [ENTER]
button to set them.
For Input Channels 17–24
1. Use the [OPTION I/O] button to locate OPTION page 2, as shown below.
2. Use [SEL] buttons 17 through 24 to select channels.
3. Use the cursor buttons to select the Routing switches and the [ENTER]
button to set them.
A highlighted Routing switch indicates that a channel has been routed.
Input channels 1 through 12 have four bus out routing switches (1, 2, 3, 4), a
stereo out routing switch (ST), and a direct out routing switch (D). The latter
switch is turned on automatically when an input channel is selected as the
source for an Option I/O out on OPTION page 4. Likewise, when an input
channel is selected as the source for an Option I/O out on OPTION page 4, the
corresponding D switch on the PAN/ROUT page is turned on. See "Assigning
Option I/O Digital Outputs" on page 219 for more information.
Input channels 13 through 24 (and the effects returns) have four bus out rout-
ing switches (1, 2, 3, 4) and a stereo out routing switch (ST).
Routing switches work in conjunction with Panpots to feed signals through to the left
and right channels of the stereo out and the odd and even bus outs. The following table
Routing Input Channels
01V—Owner's Manual
49
- Quick Links:
- Assigning Omni Outs
- Using the Effects
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 01V and is the answer not in the manual?
Questions and answers
What is the the procedure to record with o1v yamaha digital mixer
To record using the Yamaha 01V digital mixer, follow these steps:
1. A/D Conversion: Audio signals are converted to digital using the 01V’s 20-bit 128-times oversampling A/D converters.
2. Digital Signal Processing: The mixer processes audio digitally using Yamaha DSPs, ensuring minimal noise, distortion, and crosstalk.
3. Digital Connectivity: To maintain signal quality, use an Option I/O interface card to connect the 01V directly to a modular digital multitrack recorder.
4. Recording to Computer: If using a computer, install an ADAT interface card (such as the Yamaha MY8AT) to enable an ADAT lightpipe connection for transferring up to 8 channels.
5. Final Mix Output: The final stereo mix can be sent to a two-track digital recorder using the 01V’s Coaxial STEREO OUT.
6. Avoid Multiple Conversions: Keep audio in the digital domain to prevent signal degradation from multiple AD/DA conversions.
For better quality and higher sample rates, consider using a dedicated audio interface instead of the 01V.
This answer is automatically generated