110
Chapter 10—Bus Outs
Routing Bus Signals to the Stereo Bus
The bus outs can be routed to the Stereo bus and used as sub-groups during mixdown.
Initially odd bus outs are panned to the left and even bus outs to right.
1. Use the [PAN/ROUTING] button to locate PAN/ROUT page 3, a shown
below.
2. Use the cursor buttons to select the TO ST switches, and the [ENTER] but-
ton, PARAMETER wheel, or [–1/DEC] and [+1/INC] buttons to turn them
on.
3. Use the cursor buttons to select the panpots, and the PARAMETER wheel
or [–1/DEC] and [+1/INC] buttons to set them.
Including center, there are 33 pan positions.
01V—Owner's Manual
Hard left
L16 ··· L3 L2 L1 CENTER R1 R2 R3 ··· R16
Center
Hard right