Yamaha 01V Owner's Manual page 25

Analog Control Section
PAD
26dB 26dB 26dB 26dB
–16 –60 –16 –60 –16 –60 –16
+10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN
1 2 3 4
A
PAD switches
These switches are used to turn on and off the 26 dB input pads. See "Pad Switches" on
page 41 for more information.
B
15/16–2TR IN Switch
This switch is used to select the signal source for input channels 15 and 16: phone jacks
15 and 16 (15/16) or the 2TR IN phono jacks (2TR IN).
C
MONITOR–2TR IN Switch
This switch is used to select the signal source for the monitor out and phones: Monitor
bus (MONITOR) or 2TR IN phono jacks (2TR IN).
D GAIN controls
These controls are used to adjust the gain of the input preamps. See "Setting Input
Channel Gain" on page 41 for more information.
E
MONITOR OUT LEVEL control
This control is used to adjust the monitor out level.
F
PHONES LEVEL control
This control is used to adjust the phones level.
1
26dB 26dB 26dB 26dB
–60 –16 –60 –16 –60 –16 –60 –16
–34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10 GAIN
5 6 7
4
26dB 26dB 26dB
–60 –16 –60 –16 –60 –16 –60 –16
–34 +10 GAIN –34 +10 GAIN –34 +10 GAIN –34 +10
8 9 10 11
Top Panel Controls
2 3
26dB
15/16 MONITOR
2TR IN 2TR IN
–60 +10 –20 +10 –20 +10 –20
GAIN GAIN LEVEL
GAIN –34
MONITOR
12 13/14 15/16
OUT
5
01V—Owner's Manual
15
+10 –20
LEVEL
PHONES
6