Ring Mod - Yamaha 01V Owner's Manual

146
Chapter 12—Effects

RING MOD.

Ring modulator.
Parameter
SOURCE
OSC FREQ
FM FREQ
NOTE FM
FM DEPTH
TEMPO
1.
2. For more information about the FM FREQ., NOTE FM, and TEMPO parameters, see
MOD.FILTER
LFO modulation-type filter.
Parameter
FREQ.
NOTE
DEPTH
TYPE
OFFSET
RESO.
PHASE
LEVEL
TEMPO
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see "Setting
DISTORTION
Distortion effect.
Parameter
DST TYPE
DRIVE
MASTER
TONE
N.GATE
01V—Owner's Manual
Range
OSC, SELF
0.0–3000.0 Hz
0.05–40.00 Hz
*1
0–100%
*2
25–300 bps
"Setting Delay, Freq, Note & Tempo Parameters" on page 137.
Range
0.05–40.00 Hz
*1
0–100%
LPF, HPF, BPF
0–100
0–20
0.00–354.38
0–100
*2
25–300 bps
Delay, Freq, Note & Tempo Parameters" on page 137.
Range
DST1, DST2, OVD1,
OVD2, CRUNCH
0–100
0–100
–10 to +10
0–20
Description
Modulation source: oscillator or input signal
Oscillator frequency
Oscillator frequency modulation speed
Used in conjunction with TEMPO to determine FM
FREQ
Oscillator frequency modulation depth
Used in conjunction with NOTE FM to determine FM
FREQ
Description
Modulation speed
Used in conjunction with TEMPO to determine FREQ
Modulation depth
Filter type: low pass, high pass, band pass
Filter frequency offset
Filter resonance
Left-channel modulation and right-channel
modulation phase difference
Output level
Used in conjunction with NOTE to determine FREQ.
Description
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone
Noise reduction