Viewing Effects Send Settings; Metering Effects Sends - Yamaha 01V Owner's Manual

Viewing Effects Send Settings

Settings for the effects sends can be viewed, and certain parameters adjusted on VIEW
pages 1 and 2.
1. Use the [EFFECT 1] or [EFFECT 2] button to select an effects send, and
then press the MASTER [SEL] button.
EFF1 or EFF2 appears on the display, indicating that an effects send is selected.
2. Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.
3. Use the cursor buttons to select the parameters, and the PARAMETER
wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.
Parameters are explained in the following sections.

Metering Effects Sends

Effects sends signal levels can be metered on the VIEW pages. See "Viewing Effects Send
Settings" on page 127 for more information.

Viewing Effects Send Settings

01V—Owner's Manual
127