Metering The Stereo Output; Routing Signals To The Stereo Output; Viewing Stereo Output Settings - Yamaha 01V Owner's Manual

Metering the Stereo Output

Stereo output signal levels can be metered using the L STEREO R meters or HOME
page 4 meters. See "Metering Signal Levels" on page 83 for more information.

Routing Signals to the Stereo Output

Input channels 1 through 24 and the effects return can be routed to the stereo output.
See "Routing Input Channels" on page 49 for more information.

Viewing Stereo Output Settings

Settings for the stereo output can be viewed, and certain parameters adjusted on VIEW
pages 1 and 2.
1. Press the [HOME] button, and then the MASTER [SEL] button.
ST appears on the display, indicating that the stereo output is selected.
2. Use the [VIEW] button to locate VIEW pages 1 and 2, as shown below.
3. Use the cursor buttons to select the parameters, and the PARAMETER
wheel, [–1/DEC], [+1/INC], and [ENTER] buttons to set them.
Parameters are explained in the following sections.

Metering the Stereo Output

01V—Owner's Manual
89