Analog Inputs; Analog Outputs - Yamaha 01V Owner's Manual

268
Appendix B: Specifications

Analog Inputs

Connection PAD GAIN
0 –60
Input chan-
0
nels 1–12
–16
26
–20
Input channels
13–16
+10
2TR IN (L, R)
*1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when
the 01V is set to maximum gain (all faders and level controls at maximum positions).
*2. Input channel XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
*3. Input channel phone jacks are balanced (tip = hot, ring = cold, sleeve = ground).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
* For 2TR IN levels, 0 dBV is referenced to 1.00 V rms.
* Input channels 1–16 and ST IN use linear 20-bit 128-times oversampling A/D converters.
* +48 V DC phantom powering switched in 6-channel blocks (1-6, 7-12) available via the XLR-type connectors
of input channels 1–12

Analog Outputs

Connection
STEREO OUT (L, R)
OMNI OUT (1–4)
2TR OUT (L, R)
MONITOR OUT (L, R)
PHONES
*1. STEREO OUT XLR-type connectors are balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
*2. OMNI/MONITOR OUT TRS phone jacks are balanced (tip = hot, ring = cold, sleeve = ground).
*3. PHONES stereo phone jack is unbalanced (tip = send, ring = return, sleeve = ground).
* For 2TR OUT, 0 dBV is referenced to 1.00 V rms.
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
* STEREO OUT uses 20-bit 8-times oversampling D/A converters.
* OMNI OUT 1–4 and MONITOR OUT use 18-bit 8-times oversampling D/A converters.
01V—Owner's Manual
Actual For Use
Load With
Impedance Nominal
50–600
Mics
3 k
&
600 Lines
10 k 600 Lines
10 k 600 Lines
Actual For Use
Source With
Impedance Nominal
150 600 Lines
150 10 k Lines
600 10 k Lines
150 10 k Lines
8 phones
100
40 phones
Input level
*1
Nominal
Sensitivity
–66 dB –60 dB
(388 V) (775 V)
–22 dB –16 dB
(61.6 mV) (123 mV)
+4 dB +10 dB
(1.23 V) (2.45 V)
–26 dB –20 dB
(38.8 mV) (77.5 mV)
+4 dB +10 dB
(1.23 V) (2.45 V)
–10 dBV –10 dBV
(316 mV) (316 mV)
Output Level
Max. Before
Nominal
Clip
+4 dB +18 dB
(1.23 V) (6.16 V)
+4 dB +18 dB
(1.23 V) (6.16 V)
–10 dBV +4 dBV
(316 mV) (1.58 V)
+4 dB +18 dB
(1.23 V) (6.16 V)
4 mW 25 mW
12 mW 75 mW
Connector in
Max.
Console
Before Clip
–46 dB
XLR-3-31 type
(3.88 mV)
(balanced)
–2 dB
&
(616 mV)
TRS phone jack
+24 dB
(balanced)
(12.3 V)
–6 dB
(388 mV)
TRS phone jack
(balanced)
+24 dB
(12.3 V)
+4 dBV Phono
(1.58 V) (unbalanced)
Connector in Console
XLR-3-32 type
*1
(balanced)
TRS phone jack
*2
(balanced)
Phono (unbalanced)
TRS phone jack
2
(balanced)
Stereo phone jack
*3
(unbalanced)
*2
*3
3