Table of Contents
Advertisement
56
Chapter 5—Input Channels
Grouping Mutes
Input channel [ON] buttons 1 through 16 can be grouped together in mute groups for
multi-channel control using a single button. Three groups are available: D, E, and F.
Mute groups may contain on channels and off channels, making it easy to toggle
between channels. When switched, on channels go off and off channels come on.
Making a Mute Group
1. Use the [SETUP] button to locate SETUP page 3, as shown below.
2. Use the up and down cursor buttons to select the mute groups, and the
[SEL] buttons to add and remove channels to and from that group.
Channels cannot be in more than one group at a time.
Input channels 13/14, 15/16, and paired input channels 1 through 12 ("Pairing Input
Channels" on page 52) are added and removed together.
Enabling & Disabling Mute Groups
Mute groups can be enabled and disabled using the ENABLE switches. Disabling a
group allows you to set channels without removing them from the group.
1. Use the up and down cursor buttons to select the mute group that you
want to disable: D, E, or F.
2. Use the [ENTER] button, PARAMETER wheel, or [–1/DEC] and [+1/INC]
buttons to enable or disable the selected group.
01V—Owner's Manual
Mute group enabled
Mute group disabled
- Quick Links:
- Assigning Omni Outs
- Using the Effects
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 01V and is the answer not in the manual?
Questions and answers
What is the the procedure to record with o1v yamaha digital mixer
To record using the Yamaha 01V digital mixer, follow these steps:
1. A/D Conversion: Audio signals are converted to digital using the 01V’s 20-bit 128-times oversampling A/D converters.
2. Digital Signal Processing: The mixer processes audio digitally using Yamaha DSPs, ensuring minimal noise, distortion, and crosstalk.
3. Digital Connectivity: To maintain signal quality, use an Option I/O interface card to connect the 01V directly to a modular digital multitrack recorder.
4. Recording to Computer: If using a computer, install an ADAT interface card (such as the Yamaha MY8AT) to enable an ADAT lightpipe connection for transferring up to 8 channels.
5. Final Mix Output: The final stereo mix can be sent to a two-track digital recorder using the 01V’s Coaxial STEREO OUT.
6. Avoid Multiple Conversions: Keep audio in the digital domain to prevent signal degradation from multiple AD/DA conversions.
For better quality and higher sample rates, consider using a dedicated audio interface instead of the 01V.
This answer is automatically generated