Yamaha 01V Owner's Manual page 159

REV->CHORUS
Reverb and chorus effects in series.
Parameter Range
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DENSITY 0–100%
FREQ. 0.05–40.00 Hz
*1
NOTE
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
WAVE Sine, Tri
REV BAL. 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
*2
25–300 bps
TEMPO
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see "Setting
Delay, Freq, Note & Tempo Parameters" on page 137.
REV+FLANGE
Reverb and flanger effects in parallel.
Parameter Range
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DENSITY 0–100%
FREQ. 0.05–40.00 Hz
*1
NOTE
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
FB.GAIN –99 to +99%
WAVE Sine, Tri
REV/FLG 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
*2
25–300 bps
TEMPO
1.
2. For more information about the FREQ., NOTE, and TEMPO parameters, see "Setting
Delay, Freq, Note & Tempo Parameters" on page 137.
Effects Parameters
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine FREQ.
Modulation depth
Modulation delay time
Modulation waveform
Reverb and chorused reverb balance (0% = chorused
reverb, 100% = reverb)
High-pass filter cutoff frequency
Used in conjunction with NOTE to determine FREQ.
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine FREQ.
Modulation depth
Modulation delay time
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
Modulation waveform
Reverb and flange balance (0% = flange, 100% =
reverb)
High-pass filter cutoff frequency
Used in conjunction with NOTE to determine FREQ.
149
01V—Owner's Manual