Setting Preferences Information - JRC JMR-5406-X Instruction Manual

13.25 Setting Preferences Information

The main operation/setting information relating to the RADAR mode can be stored and called
collectively.
[Operation procedure]
Open the environment setting screen by performing the following menu operations.
[Menu] button → Settings → Preference
The following table shows the display items.
Display item
Name
Save
Load
Delete
Default display configurations
To save a preferences
1
Click on the [Save] button.
The confirmation dialogue box appears.
2
Enter a name in the text box and click on the [OK] button.
The current preferences are saved.
A maximum of 64 characters can be entered for a file name. If all the file name characters do
not fit in the display area, the remaining file name characters will be displayed with an
abbreviation symbol (...).
To cancel saving, click on the [Cancel] button.
When saving is completed, an item is added to a blank line in the Preferences Name list.
To load preferences
1
Select the name of the preferences you want to load, and then click on the [Load]
button.
The confirmation dialogue box appears.
2
Click on the [OK] button.
The selected preferences are loaded.
A maximum of 64 characters can be entered for a file name. If all the file name characters do
not fit in the display area, the remaining file name characters will be displayed with an
abbreviation symbol (...).
To cancel loading, click on the [Cancel] button.
Section 13 Setting up the Operation Mode
Up to 10 names that have been set by the individuals are
displayed. When the file names overflow the display area, the
remaining file names are displayed with an abbreviation
symbol (...).
Save the current setting.
Load the selected setting.
Delete the selected setting.
Set the display setting to the default settings.
13-38
Description