Setting Colours And Brightness - JRC JMR-5406-X Instruction Manual

13.22 Setting Colours and Brightness

Set the colours and brightness of the display contents.
[Operation procedure]
Open the colour and brightness setting screen by performing the following menu operations.
[Menu] button → Settings → Colour and Brightness
Setting Item
Day / Night
[Def.] button
[Display Colour] tab
Set the colours of the display contents.
Setting Item
Outer PPI
Inner PPI
Character
RADAR Video
RADAR Trails(Time)
Target Symbol
Range Rings
Own Symbol/HL/Vector
EBL1/VRM1/PI
EBL2/VRM2
Special Line
Section 13 Setting up the Operation Mode
Description of Setting
Set up the colour of the dialogue box itself.
Reset all the setting items of the mode that is
selected from the [Day/Night] combo box to the
default values.
Description of Setting
Set up the colour outside the PPI.
The label changes depending on the screen to
be called.
Set up the colour inside the PPI.
This item can be set in radar mode only.
Set up the text colour.
Set up the colour of radar video.
Set up the colour of radar trails.
Set up the colour of other ship's symbol.
Set up the colour of range rings.
Set up the colour of own ship symbol, heading
line and vector.
Set up the colours of EBL1, VRM1, and parallel
index lines (PI).
Set up the colour of EBL2 and VRM2.
Set up the colour of special lines.
13-30
Setting Value
Day1 / Day2 / Day3 /
Dusk / Night
-
Setting Value
Dark / Black
Blue / Dark Blue /
Black
White / Green / Gold /
Orange / Dark Red
Yellow / Green /
Orange / Purple /
Dark Red
White / Blue /
Cyan / Green
White / Cyan /
Green / Orange
White / Cyan /
Green / Orange
White / Cyan /
Green / Orange
White / Cyan /
Green / Orange
White / Cyan /
Green / Orange
White / Grey / Amber
/ Magenta / Blue /
Cyan / Green / Yellow
/ Orange / Dark Red