JRC JMR-5406-X Instruction Manual page 419

User Key list
The following table shows the functions that can be assigned to user keys.
Function
Show Preset Menu
Show Favourite
Zoom
Capture Screen
Show Geodetic
Clear Target Track
Clear Mark/Line
Plot Event Mark
Plot Mark
Select Obs. Scene
Load User Setting (Obs.
Scene)
Add Reference Mark
Record Operation
(Macro name)
TM Reset
PRF Fine Tuning
Acquire
Readout Information
Clear
Close All Dialogue
Display the pre-registered screen.
By displaying a screen to be registered and holding down the key to
which [Show Press Menu] is assigned, the screen can be
registered/cancelled. A screen can also be registered from the combo
box (User) that is displayed on the title bar on each screen. When "Off"
is selected in the item of the combo box, the registration is cancelled.
Combo box
Display the favourite list screen.
Enable/disable the Zoom function.
Execute screen capture.
Display the geodetic system display screen by selecting [Settings] –
[Geodetic].
Clear other ship's track by selecting it.
Clear a mark/line. Select the mark/line on the setting screen that is
displayed by pressing the [Detail] button.
Enter an event mark on the own ship's position. Select the event mark
on the setting screen that is displayed by pressing the [Detail] button.
Enter a mark on the cursor position. Select the mark to be entered on
the setting screen that is displayed by pressing the [Detail] button.
Select an observation scene that was set. Select the observation scene
on the setting screen that is displayed by pressing the [Detail] button.
Execute [Settings] – [Obs. Scene Preset] – [Load User Setting] for the
observation scene that is currently selected by the user.
Add any reference mark on the cursor position. This item can be used
in synthesis mode only.
Reproduce the key operation that was registered by [Record
Operation].
Execute the TM reset function
Increment by 1, the setting of [Settings] – [TXRX] – [PRF Fine Tuning].
Perform the same operation as the acquisition key of the multi-function
operation unit.
Perform the same operation as the numeric key of the multi-function
operation unit.
Execute the Clear function for the object under the cursor.
Close all the dialogues/menus that are displayed on the screen.
13-37
Description
Status
Indicates that the screen is assigned to the
user key (User [number that is assigned])
Indicates that the screen is not assigned to
the user key.
Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B