Using Video Processing (Echo Process) - JRC JMR-5406-X Instruction Manual

5.4.4

Using video processing (Echo Process)

This function reduces undesirable noise and enhances targets.
Memo
• When viewing a radar beacon, SART signal, or fast moving target on the radar display, select
[Process Off] (video process off).
• If video processing mode is set to [CORREL], a high speed target is less-visible .
1
Select a video processing mode from [Echo Process] (video processing) list of Radar
signal information.
Setting items
Process Off
3 Scan CORREL
4 Scan CORREL
5 Scan CORREL
Remain
Peak Hold
Section 5 Basic Operation of the Radar
Effects and recommended use conditions
Sets the image processing function to Off.
Use when the rain/snow clutter images are heavy.
Use when enhancing the target while suppressing sea clutter images.
Use when detecting small targets in sea clutter images.
Use when own ship is rolling severely.
Use for detection of small targets of low detection probability.
[Echo Process] (video
processing) combo box
5-16