Ebl; Vrm; Ebl/Vrm Intersecting Point - JRC JMR-5406-X Instruction Manual

[Moving a vertex]
When the middle point of line in the selected state is clicked on, vertex move mode of line is set.
[Inserting a vertex]
When a line segment of line in the selected state is clicked on, vertex insertion mode of line is set.
Memo
A vertex can also be inserted by using [Insert Vertex] on the context menu that is displayed by
right-clicking on the line in the selected state.
When the insertion point is the starting point or the ending point, a vertex can be inserted with
[Add vertex].
[Cancelling operation]
When you right-click, the vertex addition, move, or insertion mode can be cancelled.
(3) Text
[Moving text]
When the text object in the selected state is clicked on, move mode of the text object is set.
[Cancelling operation]
When you right-click, the text move mode can be cancelled.

3.15.7 EBL

When EBL is clicked, the mode becomes one in which EBL is operated alone.

3.15.8 VRM

When VRM is clicked, the mode becomes one in which VRM is operated alone.

3.15.9 EBL/VRM intersecting point

When the EBL/VRM intersection point is clicked, the mode becomes one in which EBL and VRM are
operated simultaneously.
3.15.10 PI
Four PI setting modes are available and the operation of the cursor AUTO mode varies depending
on the setting.
For the details, refer to "4.6 Using Parallel Index Lines (PI)".
3-33 Section 3 Common Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1