JRC JMR-5406-X Instruction Manual page 505

4. Attach the radome.
Before attaching the radome, check that the packing has no abnormality, such as deformation or
cracks.
Also, remove foreign material and dust if attached.
If any hexagonal bolt is not tightened enough or is loosened, the waterproof performance may
be deteriorated. Be sure to tighten all bolts with specified torque (10.5kgf·cm).
This completes the motor replacement procedure.
[Operation check]
After replacement, perform the following operations.
Turn on the radar, transmit radar signals when the countdown is finished, and check that
radar images are displayed normally.
When starting the motor rotation, check if no abnormal noise will be emitted when it is running,
or when it stops.
15-55 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27