Motor Replacement Procedure For Nke-2063A - JRC JMR-5406-X Instruction Manual

15.5.3.5 Motor replacement procedure for NKE-2063A

Remove the motor unit.re displayed normally.
The motor unit is installed in the starboard bow side (starboard lower side when opened) of the
scanner.
Remove the motor cable.
Remove the connectors of the cables connected to the transceiver unit.
The motor is fixed with 4 upset head bolts (M6X45FE) and spring washers (SW6).
Remove the bolts.
Transceiver Unit
Replace the motor unit.
Replace the motor unit.
Apply grease to the gear when installing the motor unit.
In addition, pay attention to the gear engagement when installing.
Section 15 Maintenance & Inspection
Motor Assy.
15-56