JRC JMR-5406-X Instruction Manual page 475

Remove the equipment cable.
Remove the connectors of the equipment cable connected to the transceiver unit.
Remove the cable clamp fixing the equipment cable.
(You do not need to remove the equipment cable from the scanner unit.)
Remove the motor cable, the receiver cable and the sensor cable.
Remove the connection cable of the motor unit.
Remove the connection cable of the receiver unit.
Remove the connection cable of the sensor.
When removing the transceiver unit, be sure not to be stuck in parts and be careful not to
interfere with the work.
15-25 Section 15 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27