Setting Gps - JRC JMR-5406-X Instruction Manual

13.18 Setting GPS

Set a GPS receiver.
[Operation procedure]
Open the GPS receiver setting screen by performing the following menu operations.
[Menu] button → Settings → GPS
The items that are displayed vary depending on the version of GPS that is installed.
The following table shows the setting items.
Setting Item
Position Enter a position of own ship.
Exclusion Satellite Enter a satellite number that is to be prohibited
from use. This item is displayed only for the GPS
of Version R29.xx and earlier versions.
Geodetic Datum Select a geodetic datum.
Antenna Height Enter an antenna height.
Fix Mode Set a position fixing mode.
2D: Use when obtaining position information
from 3 satellites only by assuming the altitude.
3D: Use when obtaining position information
from four or more satellites.
DOP Level Set a HDOP level.
The lower the value, the higher the precision
becomes and the higher the value, lower the
precision becomes.
Position Set a position averaging level.
Averaging The display item and input range vary
depending on the GPS version.
~R26.00
R26.01 ~ 39.99 : Numeric value input box
R40.00~
Limit the satellites to be used according to the
Elevation Mask
elevation angle.
Set a precision of RAIM that can be used.
RAIM Level
This item is displayed only for GPS Version
R39.00 and later versions.
Description of Setting
: Combo box
: Numeric value input box
(Position/Speed/Course)
13-25
Setting Value
0°00.00' ~ 81°00.00'N/S
0°00.00' ~ 180°00.00'E/W
0 ~ 32
0 ~ 8, 11 ~ 47
(Example) 0: WGS-84
Integer within the range
from to 8191
2D / 3D / AUTO
Up to 4 / Up to 10 / Up to 20
<~R26.00>
Short / Standard / Long
<R26.01 ~ 29.03>
1 ~ 99 sec
<R29.04 ~ 39.99>
0 ~ 99 sec
<R40.00 ~>
0 ~ 99 seconds
Integer between 5°~ 89°
Off / 10 m / 30 m / 50 m /
100 m
Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B