Lcd (Set Lcd Brightness); Ssm (Screen Saver Mode); Sst (Screen Saver Timeout) - Comtech EF Data DT-4500 Series Installation And Operation Manual

DT-4500 Series C- and Ku-Band Down Converters
Serial Interface Operation
8.7.2.12

LCD (Set LCD Brightness)

The LCD legacy command does not control any current production unit
hardware. Its syntax is still supported to allow backwards compatibility with
initially released chassis existing monitor and control applications. The default
LCD brightness is 15.
Description
Set Brightness
Confirmation:
Return Brightness:
Confirmation:
8.7.2.13

SSM (Screen Saver Mode)

The SSM legacy command does not control any current production unit
hardware. Its syntax is still supported to allow backwards compatibility with
initially released chassis existing monitor and control applications. he default
screen saver mode is 0.
Description
Set SSM:
Confirmation:
Return SSM:
Confirmation:
8.7.2.14

SST (Screen Saver Timeout)

The SST legacy command does not control any current production unit
hardware. Its syntax is still supported to allow backwards compatibility with
initially released chassis existing monitor and control applications. The default
screen saver timeout is 05.
Description
Set SST:
Confirmation:
Return SST:
Confirmation:
Details
<DEV/LCD_xx{cr} where:
xx = 0 to 30
>DEV/LCD_xx{cr}{lf}]
<DEV/LCD_{cr}
>DEV/LCD_xx{cr}{lf}]
Details
<DEV/SSM_x{cr} where:
x = 0 to 5
>DEV/SSM_x{cr}{lf}]
<DEV/SSM_{cr}
>DEV/SSM_x{cr}{lf}]
Details
<DEV/SST_xx{cr} xx = 00 to 99
>DEV/SST_xx{cr}{lf}]
<DEV/SST_{cr}
>DEV/SST_xx{cr}{lf}]
8–15
MN/DT4500.IOM
Revision 2