Front Panel Operation - Menu Matrix - Comtech EF Data DT-4500 Series Installation And Operation Manual

DT-4500 Series C- and Ku-Band Down Converters
Front Panel Operation
6.2 Front Panel Operation – Menu Matrix
Chapter Sect. Menu Screen Description
6.2.1 Opening Screen
6.2.2 Select (Main) Menu
6.2.3 CONFIG (Configuration)
6.2.3.1 (CONFIG:) OUTPUT
6.2.3.2 (CONFIG:) REMOTE
6.2.3.2.1 (REMOTE:) LOCAL
6.2.3.2.2 (REMOTE:) SERIAL
6.2.3.2.3 (REMOTE:) ETHERNET
6.2.3.2.3.1 (REMOTE:) ETHERNET ¹ ADDRESS
6.2.3.2.3.2 (REMOTE:) ETHERNET ¹ GATEWAY –
6.2.3.2.3.3 (REMOTE:) ETHERNET ¹ SNMP
6.2.3.3 (CONFIG:) REDUNDANCY
6.2.3.3.1 (REDUNDANCY:) MODE
6.2.3.3.2 (REDUNDANCY:) Auto/Manual
6.2.3.3.3 (REDUNDANCY:) FORCE
6.2.3.3.4 (REDUNDANCY:) HSB
6.2.3.4 (CONFIG:) FAULTRECOVERY
6.2.3.5 (CONFIG:) COLDSTART
6.2.4 MONITOR
6.2.5 FAULTS
6.2.5.1 (FAULTS:) CURRENT
6.2.5.2 (FAULTS:) STORED
6.2.5.2.1 (FAULTS:) STORED ¹ VIEW
(FAULTS:) STORED ¹ CLEAR-ALL
6.2.5.2.2
6.2.5.3 (FAULTS:) MASK
6.2.6 PRE-SELECTS
6.2.6.1 (PRE-SELECTS:) LOAD
6.2.6.2 (PRE-SELECTS:) PROGRAM
6.2.6.3 (PRE-SELECTS:) CLEAR
6.2.7 UTILITY
6.2.7.1 (UTILITY:) TIME
6.2.7.2 (UTILITY:) DISP
6.2.7.3 (UTILITY:) FIRMWARE
6.2.7.3.1 (FIRMWARE:) INFO
(FIRMWARE:) INFO ¹ BOOTROM
6.2.7.3.1.1
6.2.7.3.1.2 (FIRMWARE:) INFO ¹ IMAGE#1/#2 BULK; APP; FPGA
6.2.7.3.2 (FIRMWARE:) SELECT
6.2.7.4 (UTILITY:) AID
6.2.7.5 (UTILITY:) REFOSC
6.2.7.6 (UTILITY:) SLOPE
6.2.7.7 (UTILITY:) LAMP-TEST
Submenu Selections
–
CONFIG; MONITOR; FAULTS; PRE-SELECTS; UTILITY
OUTPUT; REMOTE; REDUNDANCY; FAULTRECOVERY
Frq(MHz); Atten (dB); Rx
Local; Serial; Ethernet
–
Serial Mode; Address; Baudrate
ADDRESS; GATEWAY; SNMP
–
COMMUNITIES; TRAPS
MODE; Auto/Manual; FORCE; HSB
On/Off; BU/#01-12
Select: A/M
Offset (dB); Activate BU (Yes/No)
–
Manual/Auto
–
–
CURRENT; STORED; VIEW
–
VIEW; CLEAR-ALL
–
–
Fault/Masked
LOAD; PROGRAM; CLEAR
No/Yes
Pre-Select Slot #; Frq (MHz); Atten (dB)
No/Yes
TIME; DISP; FIRMWARE; AID; REFOSC; SLOPE; LAMP-
TEST
Time (HH:MM:SS); Date (MM/DD/YY)
25%/50%/75%/100%
INFO; SELECT
BOOTROM; IMAGE#1; IMAGE#2
–
(IMAGE) #1/#2
(Application ID Message)
(Reference Frequency Adjustment)
(Converter Slope Adjustment)
No/Yes
6–6
MN/DT4500.IOM
Revision 2