Comtech EF Data DT-4500 Series Installation And Operation Manual page 8

DT-4500 Series C- and Ku-Band Down Converters
Table of Contents
5.4.1 Important Considerations .................................................................. 5-11
5.4.2 Steps to "CReflash" Upload the Firmware Files ................................. 5-12
5.4.3 Steps to FTP Upload the Firmware Files ............................................ 5-13
5.4.4 Steps to Complete the Firmware Update Procedure ......................... 5-13
5.4.4.1 Select the Boot Image .................................................................. 5-14
5.4.4.1.1 Use the Front Panel to Select the Boot Image ....................... 5-14
5.4.4.1.2 Use the HTTP Interface to Select the Boot Image ................. 5-14
5.4.4.2 Reboot the Unit ............................................................................ 5-14
5.4.4.2.1 Hard-reboot the Unit from the Rear Panel ............................ 5-14
5.4.4.2.2 Soft-reboot the Unit from the HTTP Interface ....................... 5-15
CHAPTER 6. FRONT PANEL OPERATION ........................................ 6-1
6.1 Front Panel Overview ........................................................................ 6-1
6.1.1 Power Up the Unit ............................................................................... 6-2
6.1.2 LED Indicators ....................................................................................... 6-3
6.1.3 Vacuum Fluorescent Display (VFD) ...................................................... 6-4
6.1.4 Keypad .................................................................................................. 6-5
6.2 Front Panel Operation - Menu Matrix ............................................... 6-6
6.2.1 Opening Screen .................................................................................... 6-7
6.2.2 Main Menu ........................................................................................... 6-7
6.2.3 (SELECT:) CONFIG (Configuration) Menu Branch ................................. 6-8
6.2.3.1 (CONFIG:) OUTPUT Submenu ........................................................ 6-8
6.2.3.1.1 (CONFIG:) OUTPUT Submenu (OPTIONAL DUAL IF RACK MOUNT
CONVERTERS) ........................................................................................... 6-9
6.2.3.2 (CONFIG:) REMOTE (Remote Control) Submenu ......................... 6-10
6.2.3.2.1 (REMOTE:) Local ..................................................................... 6-10
6.2.3.2.2 (REMOTE:) SERIAL .................................................................. 6-10
6.2.3.2.3 (REMOTE:) ETHERNET ............................................................ 6-11
6.2.3.2.3.1 (REMOTE:) ETHERNETADDRESS ................................. 6-11
6.2.3.2.3.2 (REMOTE:) ETHERNETGATEWAY ................................ 6-11
6.2.3.2.3.3 (REMOTE:) ETHERNETSNMP ...................................... 6-12
6.2.3.3 (CONFIG:) REDUNDANCY Submenu ............................................. 6-14
6.2.3.3.1 (REDUNDANCY:) MODE .......................................................... 6-14
6.2.3.3.2 (REDUNDANCY:) Auto/Manual ............................................... 6-15
6.2.3.3.3 (REDUNDANCY:) FORCE .......................................................... 6-15
6.2.3.3.4 (REDUNDANCY:) HSB .............................................................. 6-16
6.2.3.4 (CONFIG:) FAULTRECOVERY Submenu ......................................... 6-17
MN/DT4500.IOM / CD-MNDT4500
viii
Revision 2